Shop

01Overview

Carved alabaster cylinder with warm internal glow; hardwired with dimmable control.

A vertical 48cm alabaster wall sconce that glows from within, casting soft ambient light across bathroom vanities, hallway accents, and bedroom walls. The elongated form reads as sculpturalmodern and minimalwhile the warm light pooling through veined stone creates depth and luxury without drama. Install one or a pair; confirm your wall can support hardwired installation and check ceiling height clearance before ordering.

02Gallery03Materials & CraftNatural alabaster construction

Hand-carved white alabaster with visible stone veining. Each sconce varies slightly due to the material’s natural character.

Three metal finishes available

Choose unlacquered brass (Gold), brushed nickel, or matte black hardware. All finishes pair with white alabaster.

Dimmable and hardwired

Accepts standard E12 candelabra bulbs. Works with ordinary wall switches and dimmers. Requires professional installation into junction box.

04SizeOverall10cm diameter 48cm height (3.9 18.9)Mount depthApproximately 10cm from wallRecommended spacing (pairs)4060cm apart on vanities or above console tables05DimensionsDimensions and mountin 06SpecificationsMaterialMetal hardware, iron internal structure, white alabaster shadeSocket or Light sourceE12 candelabra base (bulb not included)Recommended bulb or Kelvin2700K or 3000K warm white LED E12 candelabra; 46W equivalent preferredVoltageAC 110240VPowerSee recommended bulb specificationsSwitchCompatible with standard wall switches and dimmers; hardwired installation requiredCord or CableHardwired; no external cordEnvironmentIndoor only; IP20 rating (not waterproof)CareDust gently with a soft, dry cloth; avoid water and harsh cleaners on alabaster07DownloadsData SheetPDFAssembly InstructionsPDF3D FilesComing soon08QuestionsDo I need an electrician to install this?

Yes. This sconce is hardwired and requires connection to a wall junction box. Do not attempt DIY installation if you are not a licensed electrician.

What bulb should I buy?

An E12 candelabra base LED bulb in warm white (2700K3000K), typically 46W. Bulb is not included with the sconce.

Can I use this in a bathroom or powder room?

Yes, but keep the fixture away from direct water spray. The IP20 rating means it is not waterproof; position it where it will not be exposed to shower steam or splashing.

Does this work with dimmer switches?

Yes. Choose a dimmable E12 candelabra LED bulb and ensure your wall dimmer is rated for LED loads. Standard incandescent dimmers may not work reliably with LED.