Shop

01Overview

Articulated red pendant with adjustable arm reaches over islands, desks, and reading chairs.

A swing-arm pendant with a glossy red dome shade and jointed metal arms that pivot and extend. The arm mechanism lets you position light exactly where you need itover a work surface, reading chair, or kitchen counter. Install it on a flat ceiling only; check your ceiling type before ordering.

02Gallery03Materials & CraftAdjustable Arm Mechanism

Joints at two points let you angle the shade up, down, and sideways. Reaches out roughly 36 cm from the ceiling point.

Red Dome Shade

Glossy red metal dome reflects light downward. 32 cm diameter provides focused task light without glare spread.

Hardwired Installation

Connects directly to household wiring. Works with standard switches and dimmer controls. No plug needed.

04SizeShade Diameter32 cm / 12.6Shade Height34 cm / 13.4Total Drop (ceiling to bottom of shade)Approximately 155 cm / 61 at full extensionArm ReachApproximately 36 cm / 14.2 from ceiling mount05DimensionsTechnical specificatio 06SpecificationsMaterialMetal and aluminum arms; red metal shadeSocket or Light sourceE26 or E27 base socket (single bulb)Recommended bulb or KelvinSee photos for typical brightness; specify wattage and color temperature when ordering your bulbVoltageAC 110240VPowerDepends on bulb wattage selectedSwitchHardwired; compatible with standard household switches and dimmersCord or CableHardwired to ceiling junction; no plug or external cordEnvironmentIndoor only; not waterproof (IP rating 20)CareWipe shade and arms with a soft, dry cloth; do not immerse07DownloadsData SheetPDFAssembly InstructionsComing soon3D FilesComing soon08QuestionsCan I install this on a sloped or vaulted ceiling?

No. This fixture is designed for flat ceilings only. Sloped ceilings are not compatible with the mounting hardware.

Is the bulb included?

No. You’ll need to purchase an E26 or E27 base bulb separately. Standard incandescent, LED, and smart bulbs work.

Does this work with a dimmer?

Yes, it’s compatible with standard household dimmers. Make sure your bulb is also dimmable.

How do I adjust the arm position?

The joints allow manual repositioning. Loosen the joint connectors slightly, move the arm to your desired angle, then tighten. No tools required for minor adjustments.

{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”Can I install this on a sloped or vaulted ceiling?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”No. This fixture is designed for flat ceilings only. Sloped ceilings are not compatible with the mounting hardware.”}},{“@type”:”Question”,”name”:”Is the bulb included?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”No. You’ll need to purchase an E26 or E27 base bulb separately. Standard incandescent, LED, and smart bulbs work.”}},{“@type”:”Question”,”name”:”Does this work with a dimmer?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Yes, it’s compatible with standard household dimmers. Make sure your bulb is also dimmable.”}},{“@type”:”Question”,”name”:”How do I adjust the arm position?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”The joints allow manual repositioning. Loosen the joint connectors slightly, move the arm to your desired angle, then tighten. No tools required for minor adjustments.”}}]}