Shop

Model UF4-33NTall Floor Luminaire Mulberry Paper & Iron01OverviewFrom Gifu, Reaching Upward

A tall, hand-bonded paper sculpture inspired by the fishing lanterns of Gifu, Japan.

02Frame & ShadeTwo Materials, One FormElement 01Black IronMatte bamboo-rib-style frameElement 02Mulberry PaperHand-pasted, translucent white03Paper CraftHand-Bonded Mulberry Paper Zoom Hand-Bonded Mulberry Paper

A note on craft.

meticulous hand-bonding process using paper and glue. Minor traces of glue along the edges of the lampshade may be visible this is an inherent signature of the craft, not a defect.

04SilhouetteThe Tall Statement UF4-33N Enlarge Diameter 47 cm 18.5HeightH 190 cm H 74.8SocketE26 / E27 standard baseA tall floor-to-ceiling presence. At 190 cm (74.8 / approximately 6 ft 3 in), the UF4-33N is a vertical statement taller than most people. Best suited to rooms with at least 2.4 m (8 ft) ceiling clearance so the lamp reads as a sculpture, not a column pressing against the ceiling.05Materials & CraftThree PillarsMulberry PaperFine mulberry paper, hand-pasted onto the iron ribs.Iron FrameSlender black iron ribs echo the bamboo structure of traditional Gifu lanterns. Matte-finished, with a subtle silhouette visible through the paper when illuminated.Hand-BondedEach shade is individually assembled and pasted by skilled artisans. Small traces of the bonding process are part of the finished object’s character.06Product NotesAt a GlanceBulb Not IncludedE26 or E27 base sold separatelyInline On/Off Switch150 cm cord standard plugIndoor OnlyAC 110240V dry interior use07SpecificationsTechnical Data

Indoor use only. Keep the paper shade away from moisture, direct heat, and open flames.08InstallationSetup & Wiring

• Unbox with care because of its height (190 cm), the UF4-33N ships in an elongated box. Assembly is floor-up: set the base down first, then slide the iron rib frame over the base, followed by the mulberry paper shade.
• Install an E26 or E27 bulb (sold separately). A warm white LED bulb (2700K3000K) gives the most flattering, honeyed glow through the mulberry paper shade. Low-wattage LEDs (58 W) are recommended to keep heat output low.
• Plug into a standard wall outlet. The 150 cm cord includes an inline on/off switch for easy reach from a sofa or reading corner.
• When replacing the bulb, unplug the lamp and let the bulb cool completely. Handle the paper shade with clean, dry hands never press or rub against the paper, as the shape is maintained by wire tension.

Wiring Guide Inside the SocketTo ensure correct operation, connect the wires as follows: the Black wire to hole number 2, and the White wire to hole number 3. Click to enlarge 09QuestionsFrequently AskedHow tall is the UF4-33N and will it fit my room?The UF4-33N stands at 190 cm (74.8 / approximately 6 ft 3 in). We recommend a minimum ceiling clearance of 2.4 m (8 ft) below this, the lamp will feel crowded. In rooms with 2.7 m (9 ft) or higher ceilings, it reads at its most dramatic.Is a light bulb included?No. We recommend a warm white LED (2700K3000K, 58W) for the most flattering glow through the mulberry paper shade, and to keep heat output low on the paper.Why are there small glue marks on the edge of my lampshade?Minor glue traces along the edges are inherent to this traditional craft and are considered normal not a quality defect. Each shade is subtly different as a result.How do I connect the wires correctly?Inside the lamp’s socket there are numbered terminal holes. Connect the black wire to hole number 2, and the white wire to hole number 3. See the wiring diagram in Section 08 above and refer to the installation video for a step-by-step walk-through.Yes. Just pair it with a bulb rated for your local voltage.The lamp itself has a simple inline on/off switch. To dim the light, install a dimmable LED bulb and plug the lamp into a wall outlet controlled by a compatible dimmer switch. The lamp does not have a built-in dimmer.No. The mulberry paper shade is sensitive to moisture and humidity avoid bathrooms, kitchens with high steam exposure, covered porches, or any outdoor environment. Also keep the shade away from radiators and direct heat sources.How do I clean the paper shade?Dust very gently with a soft, dry brush (a camel-hair paintbrush or a feather duster works well). Do not use water, cleaning sprays, or damp cloths on the paper. Handle with clean, dry hands to avoid staining.Will the paper yellow or fade over time?Mulberry paper naturally deepens very slightly with age and exposure to light this is part of the piece’s character and not considered a defect. Keep the lamp out of direct sunlight to slow natural ageing, and use a low-heat LED bulb (not halogen or incandescent) to minimise yellowing from heat.10DownloadsSpec Install Data Sheet Assembly Instructions 1951 Heritage DesignHand-Pasted Mulberry Paper190 cm Tall StatementGlobal Certification{“@context”: “https://schema.org”, “@type”: “FAQPage”, “mainEntity”: [{“@type”: “Question”, “name”: “How tall is the UF4-33N and will it fit my room?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “The UF4-33N stands at 190 cm (74.8 / approximately 6 ft 3 in). We recommend a minimum ceiling clearance of 2.4 m (8 ft) below this, the lamp will feel crowded. In rooms with 2.7 m (9 ft) or higher ceilings, it reads at its most dramatic.”}}, {“@type”: “Question”, “name”: “Is a light bulb included?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “No. Minor glue traces along the edges are inherent to this traditional craft and are considered normal not a quality defect. Each shade is subtly different as a result.”}}, {“@type”: “Question”, “name”: “How do I connect the wires correctly?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “Inside the lamp’s socket there are numbered terminal holes. Connect the black wire to hole number 2, and the white wire to hole number 3. To dim the light, install a dimmable LED bulb and plug the lamp into a wall outlet controlled by a compatible dimmer switch. The mulberry paper shade is sensitive to moisture and humidity avoid bathrooms, kitchens with high steam exposure, covered porches, or any outdoor environment. Also keep the shade away from radiators and direct heat sources.”}}, {“@type”: “Question”, “name”: “How do I clean the paper shade?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “Dust very gently with a soft, dry brush (a camel-hair paintbrush or a feather duster works well). Do not use water, cleaning sprays, or damp cloths on the paper. Handle with clean, dry hands to avoid staining.”}}, {“@type”: “Question”, “name”: “Will the paper yellow or fade over time?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “Mulberry paper naturally deepens very slightly with age and exposure to light this is part of the piece’s character and not considered a defect. Keep the lamp out of direct sunlight to slow natural ageing, and use a low-heat LED bulb (not halogen or incandescent) to minimise yellowing from heat.”}}]}