Wafer

Disk Flush-Mount Ceiling Light 01 Overview A Slim Disk, Pressed to the Ceiling

Thin enough to be a wafer pressed flush to the ceiling, glowing softly below.

Wafer is a low-profile flush-mount LED ceiling light built for the rooms where the fixture should quietly serve the space rather than dominate it hallways, bedrooms, kitchens, utility corridors, walk-in closets, or anywhere a clean, unobtrusive ceiling light is needed. Just 11 cm (4.3) tall, the disk sits flush against the ceiling without the cramped feeling of a hanging pendant. A broad cream-white acrylic shade diffuses the integrated LED into a generous, even glow at 2700K3000K warm light, paired with a warm wood-tone metal trim that reads as quiet warmth against any ceiling. A single, considered combination designed to recede gracefully into traditional and contemporary interiors alike.

02 Color Wood Color & White Element 01 Wood Color Warm metal trim backplate finish Element 02 White Cream acrylic disk shade A single, considered combination. Wafer pairs a warm wood-tone metal trim with a soft cream-white acrylic shade in one fixed configuration no finish decision required at checkout. The wood-tone reads as warmth against any ceiling colour; the cream-white shade glows softly when lit. Designed to recede gracefully into both traditional and contemporary interiors. 03 Proportions A Single Considered Size Enlarge Diameter Dia 35 cm 13.7″ Profile H 11 cm H 4.3″ Mount Flush close-to-ceiling 04 Materials & Craft Three Pillars Metal Backplate A slim metal plate sits flush to the ceiling, finished in a warm wood tone that adds quiet warmth without drawing attention to itself. Architectural, restrained, and quietly serving its role rather than competing with the ceiling. Cream Acrylic Shade A wide, disk-shaped acrylic diffuser in a warm cream palette spreads the light evenly across the room. No hot spots, no harsh edges just a soft, generous glow. Acrylic is impact-resistant and easy to clean, unlike fragile glass. Integrated LED 2700K3000K A built-in, factory-tuned LED at warm 2700K3000K eliminates the need for bulbs no buying, no replacing, no compatibility issues. Designed for tens of thousands of hours of reliable, low-maintenance use. 05 Product Notes At a Glance Integrated LED Built-in no bulb needed Dimmable Ready Works with TRIAC dimmers Flush Mount IP20 Indoor use not waterproof 06 Specifications Technical Data

Indoor use only. Designed for dry interior environments not suitable for bathrooms, wet rooms, saunas, covered porches, or outdoor installations. Order total does not include customs duties or local import taxes, which may be collected by the courier on delivery. 07 Installation Setup Notes

• Hardwired ceiling installation a licensed electrician is recommended for safe mounting, wiring, and grounding.
• Wafer mounts flush against the ceiling. A standard ceiling junction box is sufficient; verify with your electrician that the box is correctly positioned and supported.
• No bulb required. The LED is integrated and factory-tuned simply wire the fixture, restore power, and the light is ready to use.
• For dimming, install Wafer on a wall circuit with a TRIAC-compatible LED dimmer. Confirm dimmer compatibility before installation to avoid flicker at low output. Standard incandescent dimmers may not perform correctly with LED loads.
• The acrylic shade and backplate attach with simple retaining hardware follow the included Assembly Instructions for the correct sequence. Handle the shade with clean, dry hands; avoid touching the LED module directly.

08 Questions Frequently Asked What does the name “Wafer” mean? A wafer describes the lamp’s silhouette: an ultra-thin disk pressed flush to the ceiling. In the lighting industry, “wafer light” is the standard term for this category of slim, low-profile flush-mount LED ceiling fixture. The name describes the form precisely thin, rounded, flush. Does it come with a bulb? No bulb is needed the LED is integrated into the fixture and pre-tuned at the factory at 2700K3000K warm light. You never buy or replace a bulb. The LED is rated for tens of thousands of hours of use. What ceiling height does Wafer fit? Wafer hangs only 11 cm (4.3 inches) from the ceiling suitable for standard 8-foot ceilings and even lower 7-foot ceilings where a hanging pendant would feel cramped. It is a true flush mount, not a semi-flush, so it sits genuinely close to the ceiling. Why only one finish (Wood Color & White)? Wafer is offered as a single, considered combination a warm wood-tone metal trim paired with a cream-white acrylic shade. The pairing was chosen intentionally: it works in both traditional and contemporary interiors without committing to either. The wood-tone reads as warmth on the ceiling; the cream-white shade glows softly when lit. No finish decision required at checkout. What color temperature does the LED produce? Warm Light, 2700K3000K a soft, honey-glow tone that flatters interiors and feels comfortable in evening use. The colour temperature is fixed at the factory (this is a single-CCT fixture, not tunable). Warm light is well suited to bedrooms, hallways, kitchens, and living areas where a cozy, ambient quality is preferred over the cooler, bluer light of daylight bulbs. Is Wafer dimmable? Yes. Wafer is compatible with standard household switches and with TRIAC-compatible LED dimmers. Install it on a dimmer-switch circuit to allow smooth brightness adjustment. Confirm your dimmer is rated for LED / electronic loads for best performance older incandescent dimmers may not dim LEDs smoothly. What size room does Wafer light? At 35 cm (13.7) diameter, Wafer works as primary ambient lighting for rooms up to roughly 1520 m (160215 sq ft) typical bedrooms, hallways, kitchens, utility rooms, walk-in closets, and small dining rooms. For larger rooms, install multiple Wafers in a grid pattern, or pair with secondary task lighting. Where does Wafer work best? Hallways, bedrooms, kitchens, utility rooms, entries, walk-in closets, small dining rooms, and any room where you want clean ambient ceiling light without a large sculptural fixture. Wafer is especially well suited to standard or low ceilings where a pendant would feel cramped. Is the shade made of glass or acrylic? Acrylic. The cream-toned shade is acrylic, not glass chosen for impact resistance, even light diffusion, and easy cleaning. Acrylic produces the same diffused glow as glass but is far less fragile during installation and ongoing use. Can I use it on both 110V and 220V circuits? Yes. Wafer supports full-range AC 110240V and is certified for use in North America, Europe, Australia, and the Middle East no additional transformer required. Can I install it in a bathroom or outdoors? No. Wafer is IP20-rated for dry indoor use only not suitable for bathrooms, wet rooms, saunas, covered porches, or any outdoor environment. For damp or wet locations, an IP44 or higher fixture is required by code in most jurisdictions. How do I clean the shade? With the power off and the fixture cool, dust the acrylic shade gently with a soft dry microfibre cloth. For stubborn marks, use a slightly damp cloth (water only, or a drop of pH-neutral soap) and dry immediately. Avoid ammonia-based glass cleaners, solvents, and abrasives these will haze or scratch the acrylic. 09 Downloads Spec Install Data Sheet Assembly Instructions Slim Wafer Disk Integrated LED Flush Low Profile Dimmable {“@context”: “https://schema.org”, “@type”: “FAQPage”, “mainEntity”: [{“@type”: “Question”, “name”: “What does the name “Wafer” mean?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “A wafer describes the lamp’s silhouette: an ultra-thin disk pressed flush to the ceiling. In the lighting industry, ” wafer light ” is the standard term for this category of slim, low-profile flush-mount LED ceiling fixture. The name describes the form precisely thin, rounded, flush.”}}, {“@type”: “Question”, “name”: “Does it come with a bulb?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “No bulb is needed the LED is integrated into the fixture and pre-tuned at the factory at 2700K3000K warm light. You never buy or replace a bulb. The LED is rated for tens of thousands of hours of use.”}}, {“@type”: “Question”, “name”: “What ceiling height does Wafer fit?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “Wafer hangs only 11 cm (4.3 inches) from the ceiling suitable for standard 8-foot ceilings and even lower 7-foot ceilings where a hanging pendant would feel cramped. It is a true flush mount, not a semi-flush, so it sits genuinely close to the ceiling.”}}, {“@type”: “Question”, “name”: “Why only one finish (Wood Color & White)?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “Wafer is offered as a single, considered combination a warm wood-tone metal trim paired with a cream-white acrylic shade. The pairing was chosen intentionally: it works in both traditional and contemporary interiors without committing to either. The wood-tone reads as warmth on the ceiling; the cream-white shade glows softly when lit. No finish decision required at checkout.”}}, {“@type”: “Question”, “name”: “What color temperature does the LED produce?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “Warm Light, 2700K3000K a soft, honey-glow tone that flatters interiors and feels comfortable in evening use. The colour temperature is fixed at the factory (this is a single-CCT fixture, not tunable). Warm light is well suited to bedrooms, hallways, kitchens, and living areas where a cozy, ambient quality is preferred over the cooler, bluer light of daylight bulbs.”}}, {“@type”: “Question”, “name”: “Is Wafer dimmable?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “Yes. Wafer is compatible with standard household switches and with TRIAC-compatible LED dimmers . Install it on a dimmer-switch circuit to allow smooth brightness adjustment. Confirm your dimmer is rated for LED / electronic loads for best performance older incandescent dimmers may not dim LEDs smoothly.”}}, {“@type”: “Question”, “name”: “What size room does Wafer light?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “At 35 cm (13.7) diameter, Wafer works as primary ambient lighting for rooms up to roughly 1520 m (160215 sq ft) typical bedrooms, hallways, kitchens, utility rooms, walk-in closets, and small dining rooms. For larger rooms, install multiple Wafers in a grid pattern, or pair with secondary task lighting.”}}, {“@type”: “Question”, “name”: “Where does Wafer work best?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “Hallways, bedrooms, kitchens, utility rooms, entries, walk-in closets, small dining rooms, and any room where you want clean ambient ceiling light without a large sculptural fixture. Wafer is especially well suited to standard or low ceilings where a pendant would feel cramped.”}}, {“@type”: “Question”, “name”: “Is the shade made of glass or acrylic?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “Acrylic. The cream-toned shade is acrylic, not glass chosen for impact resistance, even light diffusion, and easy cleaning. Acrylic produces the same diffused glow as glass but is far less fragile during installation and ongoing use.”}}, {“@type”: “Question”, “name”: “Can I use it on both 110V and 220V circuits?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “Yes. Wafer supports full-range AC 110240V and is certified for use in North America, Europe, Australia, and the Middle East no additional transformer required.”}}, {“@type”: “Question”, “name”: “Can I install it in a bathroom or outdoors?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “No. Wafer is IP20-rated for dry indoor use only not suitable for bathrooms, wet rooms, saunas, covered porches, or any outdoor environment. For damp or wet locations, an IP44 or higher fixture is required by code in most jurisdictions.”}}, {“@type”: “Question”, “name”: “How do I clean the shade?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “With the power off and the fixture cool, dust the acrylic shade gently with a soft dry microfibre cloth . For stubborn marks, use a slightly damp cloth (water only, or a drop of pH-neutral soap) and dry immediately. Avoid ammonia-based glass cleaners, solvents, and abrasives these will haze or scratch the acrylic.”}}]}